SEP-R-ATOR™ Solvent Reclaimer

Recycle Dirty Parts Washer Solvent Yourself

It is not a still. We have been engineering parts washers and formulating solvents for more than six decades. And now that technology has produced an effective alternative to the problem of solvent disposal by allowing you to use your parts washing solvent indefinitely.

SEP-R-ATOR™ eliminates the need for contracting with outside rental services and ends that worry over EPA regulations. In short, SEP-R-ATOR™ recycles parts washing solvent. Solvent does not wear out, it gets dirty. So, instead of throwing money away, you can save money and increase profits.

SEP-R-ATOR™ is not a still. It uses a unique high technology process* to restore solvent to like-new purity at a rate in excess of 10 GPH (gallons per hour). It is simple and safe requiring only a 110V outlet and ordinary tap water supply. No need for explosion-proof environment or special wiring. No worries about hot vapors or heating and cooling cycles.

Most important, SEP-R-ATOR™ gives you 100% control over your parts cleaning operation. You're no longer dependent on outside suppliers or contract service groups.

Stop wasting money …

1. Plug it in.
2. Pour in dirty solvent.
3. Push "Start" button.

SEP-R-ATOR™ S430 Specifications

Overall Machine:
Length	29"
Width	33"
Height	37"
Tank Capacities (Maximum):
Dirty Solvent Reservoir	30 gal
Recycled Solvent Reservoir Aux. Container required 60 gal
Gallons per Hour Cleaned:	5*
Electrical Requirements:
Voltage (220V available)	110V
Phase	single
Motor Horsepower	3⁄4
Water Connections:	3/4"
Miscellaneous:
Residue Drain Height above floor	11"
Recycled Solvent Drain height above floor	N/A
Weight	390 lbs.
*Output rates depend on condition of solvent.

You can contract for monthly service and pay forever, or you can recycle your own parts washer solvent …

• Save money
• Get plug-it-in simplicity
• High-tech process, not high temp distillation
• ETL Listed